Counter-Drone Radar and EO/IR Tracking

No. The LS-VRT3000-008 specifies ≥3 km detection/tracking in each channel, not identification. Recognizing a drone requires sufficient image detail and suitable viewing conditions. Define what operators must distinguish, then agree on target types, distances and identification criteria for the assessment.

Yes, radar detection does not require an active drone control link because it uses reflected radio energy rather than decoding communications. A radio-silent drone may therefore remain detectable by radar, although detection still depends on its radar signature, position and site conditions; radio silence does not guarantee detection.

The LY-TPS5000 specifies 360° azimuth coverage, 0–30° elevation coverage and a 200 m blind zone, with ≥4 km detection for UAV targets with RCS <0.01 m². These figures do not establish complete site coverage. Provide a site plan showing buildings, terrain and approach paths so near-field gaps and obstructions can be assessed.

The LS-VRT3000-008 combines visible imaging at 1920 × 1080 with 20× optical zoom and cooled infrared at 640 × 512 with 22× optical zoom. Visible images support visual detail when lighting permits; infrared supports observation without visible illumination. Describe lighting, weather and target-detail requirements rather than assuming equal identification performance in both channels.

Do not assume automatic radar-to-camera tracking is included. Radar locates targets and EO/IR helps operators examine them, but the handoff requires a confirmed integration scope. Provide existing system details and request confirmation of compatible interfaces, target-coordinate exchange, camera control and operator workflow before specifying automatic cueing.

Send SIFT a site layout, priority approach paths, target types, required detection and tracking distances, lighting conditions and existing equipment details. Distinguish detection, tracking and identification objectives. Ask the quotation to define installation responsibilities and acceptance criteria; any factory or site acceptance testing (FAT/SAT) should be agreed as part of the scope, not assumed included.